Aritech 1X-F Series User Manual

1X-F Series Operation Manual 1
Introduction
This is the operation manual for the 1X-F Series fire alarm control panels. Read
these instructions and all related documentation entirely before operating this
product.
Product range
The 1X-F Series includes the models shown below.
Table 1: 1X-F Series models
Model
Description
1X
-F2 Two-zone fire alarm control panel
1X
-F4 Four-zone fire alarm control panel with fire routing
1X
-F8 Eight-zone fire alarm control panel with fire routing
Fire routing on the four- and eight-zone models is not available for all operating
modes. For more information, see “Sounder and fire routing delays” on page 2.
Operating modes
Supported operating modes are shown in the table below. The default operating
mode is EN 54-2.
Table 2: Operating modes
Operating mode
Region
EN 54
-2 (default) European Union
EN 54
-2 Evacuation European Union (Spain)
EN 54
-2 Scandinavia European Union (Scandinavia)
BS 5839
-1 United Kingdom
NBN
S 21-100 Belgium
NEN 2535
The Netherlands
The choice of operating mode used depends on your location and the specific
regional requirements of your fire alarm system.
As there is no visual indication of the active operating mode, your installation or
maintenance contractor should provide full details of your configuration.

Aritech 1X-F Series Specifications

General

Brand	Aritech
Model	1X-F Series
Category	Control Panel
Language	English