Aruba Instant On AP11D Access Point
Installation Guide
Rev01 | June 2019 1
The Aruba Instant On AP11D dual-radio access point supports IEEE 802.11ac Wave 2, delivering high
performance with 2x2 MU-MIMO (Multi-User Multiple-Input, Multiple-Output) technology, while also supporting
802.11a/b/g /n wireless services.
Additionally, the AP11D has three Ethernet ports for wired connectivity. The AP11D access point is designed for
desk and wall mount.
Package Contents
1 x AP11D Access Point
1 x Desk stand
1 x Single-gang wiring box mount bracket
1 x Ethernet jumper cable
1 x Ethernet cable
2 x M2.5x 2mm Phillips head screw
2 x #6-32x1.5” Phillips head screw
1 x M2.5x6.5mm T8H Torx head security screw
Hardware Overview
The following sections outline the hardware components of the AP11D access point.
Figure 1 AP11D (front view)
If you have ordered AP11D bundle, the package would also include a power adapter and cord to power the AP
through an electrical power outlet.
Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton, including
the original packing materials. Use these materials to repack and return the unit to the supplier if needed.
To Next Page
Need help?
General
