Assa Abloy Norton D6001DE-R Double Unit Series User Manual

Copyright © 2019-2020, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9360-1035-020 Rev 3 03/20
10
D6001DE-R Double Unit Series (Double Egress) Power Operator
F. Install Union Assembly.
1. Orient union assembly so access door
covering selector mode switches faces oor.
(Figure 17)
2. Secure union assembly to backplate using
four (4) #8-32 x 5/16" Phillips pan head
screws. (Figure 17)
3. Connect 4-pin black square connector from
power module sub-assembly to 4-pin black
connector from union assembly for each
operator. (Figure 18)
NOTE: Connectors are keyed and only
assembly one way.
Install Operator
Figure 16
Access Door
Union Assembly - View From Floor
Spacer
Spacer
Union Assembly
Mounting Screw
(typical)
Figure 17
Power Module
Sub-assembly
4 Pin Black
Connector
Power Module
Sub-assembly
4 Pin Black
Connector
Union Assembly
4 Pin Black Connector
E. Connect Power Module Sub-assemblies to LAPS.
1. Attach 10-pin black connectors between each power
module sub-assembly and its operator LAP.
(Figure 16)
NOTE: Connectors are keyed and only attach one way.
Figure 18
Operator LAP
3 Pin White
Connector
Power Module
Sub-assembly
3 Pin White
Connector
Power Module
Sub-assembly
10 Pin Black
Connector
Operator LAP
10 Pin Black
Connector
Operator LAP
3 Pin White
Connector
Power Module
Sub-assembly
3 Pin White
Connector
Power Module
Sub-assembly
10 Pin Black
Connector
Operator LAP
10 Pin Black
Connector
2. Attach 3-pin white connectors between each power
module sub-assembly and its operator LAP.
(Figure 16)

Assa Abloy Norton D6001DE-R Double Unit Series Specifications

General

Brand	Assa Abloy
Model	Norton D6001DE-R Double Unit Series
Category	Garage Door Opener
Language	English