Assa Abloy Norton D6001DE-R Double Unit Series User Manual

Copyright © 2019-2020, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9360-1035-020 Rev 3 03/20
12
D6001DE-R Double Unit Series (Double Egress) Power Operator
B. Install Main Arm.
A. Mount Forearm and Shoe.
Install Arms to Right Door
Figure 25
Figure 26
Figure 27
Figure 28
Figure 29
Figure 30
1. Using previously prepared holes in
door, install two (2) 1/4-20 x 1-5/8"
screws through shoe and into sex
bolts. (Figure 25)
NOTE: Orient shoe with long side of
shoe toward hinge. (Figure 26)
View from ceiling looking downward
1. Open right door.
2. Slide forearm into main arm
adjusting tube. (Figure 27)
3. Place square of main arm onto closer
pinion. (Figure 27)
NOTE: Pinion at should be aligned
as shown. (Figure 28)
4. Attach main arm to pinion with
screw then tighten with 7/16"
wrench. (Figure 27)
5. With door closed, rotate main arm
away from hinge until forearm is
perpendicular (90 degrees) with
door. (Figure 29)
6. While holding arm in position,
secure forearm to adjusting tube
with forearm screw. (Figure 30)
View from ceiling looking downward
Long Side
of Shoe
Hinge
Forearm
Main Arm
90º
Pinion
Screw
Main Arm
Adjusting Tube
Forearm

Assa Abloy Norton D6001DE-R Double Unit Series Specifications

General

Brand	Assa Abloy
Model	Norton D6001DE-R Double Unit Series
Category	Garage Door Opener
Language	English