ASUS CUSL2 User’s Manual 73
4. BIOS SETUP
4. BIOS SETUP
Hardware Monitor
4.5.2 Hardware Monitor
MB Temperature [xxxC/xxxF]
CPU Temperature [xxxC/xxxF]
The onboard hardware monitor is able to detect the MB (motherboard) and
CPU temperatures. Set to [Ignore] only if necessary.
CPU Fan Speed [xxxxRPM]
Power Fan Speed [xxxxRPM]
Chassis Fan Speed [xxxxRPM]
The onboard hardware monitor is able to detect the CPU, power supply, and
chassis fan speeds in rotations per minute (RPM). The presence of the fans
is automatically detected. Set to [Ignore] only if necessary.
VCORE1 Voltage, +3.3V Voltage, +5V Voltage, +12V Voltage
, -12V
Voltage, -5V Voltage
[xx.xV]
The onboard hardware monitor is able to detect the voltage output by the
onboard voltage regulators. Set to [Ignore] only if necessary.
NOTE: If any of the monitored items is out of range, an error message will
appear: “Hardware Monitor found an error. Enter Power setup menu for
details”. You will then be prompted to “Press F1 to continue, DEL to enter
SETUP”.
To Next Page
Loading...
Need help?
General
