To Next Page

To Previous Page

Using the Notebook PC 4

Optical Drive

Inserting an optical disc

1. While the Notebook PC’s power is ON, press

the drive’s eject button and the tray will eject

out partially.

2. Gently pull on the drive’s front panel and slide the

tray completely out. Be careful not to touch the

CD drive lens and other mechanisms. Make sure

there are no obstructions that may get jammed un-

der the drive’s tray.

3. Hold the disc by the edge and face the disc’s

printed side up. Push down on both sides of

the disc’s center until the disc snaps onto the

hub. The hub should be higher than the disc

when correctly mounted.

4. Slowly push the drive’s tray back in. The drive will

begin reading the table of contents (TOC) on the

disc. When the drive stops, the disc is ready to be

used.

DCIN

NOTE: It is normal to hear as well as feel the CD spinning with great intensity in the

CD drive while data is read.

Asus M2A User Manual

Questions and Answers: