ASUS M2N68-AM 2-9
2.3 Main menu
When you enter the BIOS Setup program, the Main menu screen appears, giving you an
overview of the basic system information.
Refer to section 2.2.1 BIOS menu screen for information on the menu screen items and
how to navigate through them.
2.3.1 System Time [xx:xx:xx]
Allows you to set the system time.
2.3.2 System Date [Day xx/xx/xxxx]
Allows you to set the system date.
2.3.3 Legacy Diskette A [1.44M, 3.5 in.]
Sets the type of oppy drive installed. Conguration options: [Disabled] [720K , 3.5 in.]
[1.44M, 3.5 in.] [360K, 5.25 pin] [1.2M 5.25 pin] [2.88M, 3.5 pin]
2.3.4 IDE Conguration
The items in this menu allow you to set or change the congurations for the IDE devices
installed in the system. Select an item then press <Enter> if you wish to congure the item.
Onboard IDE Controller [Enabled]
Allows you to enable or disable the onboard IDE controller. Conguration options: [Enabled]
[Disabled]
Serial-ATA Devices [Enabled]
Allows you to disable or set the Serial-ATA devices. Conguration options: [Enabled]
[Disabled]
SATA Mode select [SATA Mode]
Allows you to select the SATA Mode. Conguration options: [SATA Mode] [RAID Mode]
System Time [04: 08 : 23]
System Date [Wed 01/09/2002]
Legacy Diskette A [1.44M,3.5in.]
IDE Conguration
Primary IDE Master : [Not Detected]
Primary IDE Slave : [Not Detected]
SATA1 : [Not Detected]
SATA2 : [Not Detected]
SATA3 : [Not Detected]
SATA4 : [Not Detected]
System Information
Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a eld.
Use [+] or [-] to
congure system Time.
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
Select Screen
Select Item
+-
Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
BIOS SETUP UTILITY
Main Advanced Power Boot Tools Exit
To Next Page
Loading...
Need help?
General
