ASUS P5GC-MX 2-21
Enhanced C1 Control [Auto]
When set to [Auto], the BIOS will automatically check the CPU’s capability
to enable the C1E support. In C1E mode, the CPU power consumption is
lower when idle. Conguration options: [Auto] [Disabled]
CPU Internal Thermal Control [Auto]
Disables or sets the CPU internal thermal control.
Conguration options: [Auto] [Disabled]
Hyper Threading Technology [Enabled]
Allows you to enable or disable the processor Hyper-Threading Technology.
Conguration options: [Disabled] [Enabled]
The following item appears only when you installed an Intel
®
Pentium
®
4 and later processors that supports the Enhanced Intel SpeedStep
®
Technology (EIST).
Intel(R) SpeedStep Technology [Disabled]
Allows you to use the Enhanced Intel SpeedStep
®
Technology. When set
to [Automatic], you can adjust the system power settings in the operating
system to use the EIST feature.
Set this item to [Maximum] or [Disabled] if you do not want to use the EIST.
The CPU constantly operates at a lower internal frequency when you set
this item to [Minimum].
Conguration options: [Enabled] [Disabled]
2.4.3 Chipset
The Chipset menu allows you to change the advanced chipset settings.
Select an item then press <Enter> to display the sub-menu.
Advanced Chipset Settings
DRAM Frequency [Auto]
Congure DRAM Timing by SPD [Enabled]
Hyper Path 3 [Auto]
DRAM Throttling Threshold [Auto]
Boot Graphic Adapter Priority [PCI Express/Int-VG]
Internal Graphics Mode Select [Enabled, 8MB]
Graphics memory type [Auto]
Boot Display Device [Auto]
TV Connector [Auto]
HDTV Output [Auto]
TV Standard [VBIOS-Default]
PEG Buffer Length [Auto]
Link Latency [Auto]
PEG Root Control [Auto]
Slot Power [Auto]
High Priority Port Select [Disabled]
To Next Page
Loading...
Need help?
General
