Asus Motherboard P5GC-MX User Manual

ASUS P5GC-MX 2-33
If you forget your BIOS password, you can clear clear it by erasing
the CMOS Real Time Clock (RTC) RAM. See section “2.6 Jumpers” for
information on how to erase the RTC RAM.
Interrupt 19 Capture [Disabled]
When set to [Enabled], this function allows the option ROMs to trap
Interrupt 19. Conguration options: [Disabled] [Enabled]
2.6.3 Security
The Security menu items allow you to change the system security settings.
Select an item then press <Enter> to display the conguration options.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Security Settings
Supervisor Password : Not Installed
User Password : Not Installed
Change Supervisor Password
<Enter> to change
password.
<Enter> again to
disabled password.
Change Supervisor Password
Select this item to set or change the supervisor password. The Supervisor
Password item on top of the screen shows the default Not Installed. After
you set a password, this item shows Installed.
To set a Supervisor Password:
1. Select the Change Supervisor Password item and press <Enter>.
2. From the password box, type a password composed of at least six
letters and/or numbers, then press <Enter>.
3. Conrm the password when prompted.
The message “Password Installed” appears after you successfully set your
password.
To change the supervisor password, follow the same steps as in setting a
user password.
To clear the supervisor password, select the Change Supervisor Password
then press <Enter>. The message “Password Uninstalled” appears.

Asus Motherboard P5GC-MX Specifications

General

Form Factor	Micro ATX
Chipset	Intel 945GC
CPU Socket	LGA 775
Memory Slots	2 x DIMM
Maximum Memory	2 GB
Memory Type	DDR2
Integrated Graphics	Intel GMA 950
Video Outputs	1 x VGA
Expansion Slots	1 x PCIe x16, 2 x PCI
Audio	Realtek ALC883 6-Channel High Definition Audio
USB Ports	8 x USB 2.0
Storage Interface	4 x SATA 3 Gb/s, 1 x UltraDMA 100/66