EasyManuals Logo

Asus P9X79 User Manual

Asus P9X79
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
ASUS P9X79 2-17
Chapter 2
2.2.5 Onboard switches
Onboard switches allow you to ne-tune performance when working on a bare or open-
case system. This is ideal for overclockers and gamers who continually change settings to
enhance system performance.
1. MemOK! switch
Installing DIMMs that are incompatible with the motherboard may cause system
boot failure, and the DRAM_LED near the MemOK! switch lights continuously. Press
and hold the MemOK! switch until the DRAM_LED starts blinking to begin automatic
memory compatibility tuning for successful boot.
Refer to section
2.2.6 Onboard LEDs
for the exact location of the DRAM_LED.
The DRAM_LED also lights when the DIMM is not properly installed. Turn off the
system and reinstall the DIMM before using the MemOK! function.
The MemOK! switch does not function under Windows™ OS environment.
During the tuning process, the system loads and tests failsafe memory settings. It
takes about 30 seconds for the system to test one set of failsafe settings. If the test
fails, the system reboots and test the next set of failsafe settings. The blinking speed
of the DRAM_LED increases, indicating different test processes.
Due to memory tuning requirement, the system automatically reboots when each
timing set is tested. If the installed DIMMs still fail to boot after the whole tuning
process, the DRAM_LED lights continuously. Replace the DIMMs with ones
recommended in the Memory QVL (Qualied Vendors Lists) in this user manual or on
the ASUS website at www.asus.com.
If you turn off the computer and replace DIMMs during the tuning process, the system
continues memory tuning after turning on the computer. To stop memory tuning, turn
off the computer and unplug the power cord for about 5–10 seconds.
If your system fail to boot due to BIOS overclocking, press the MemOK! switch to boot
and load BIOS default settings. A messgae will appear during POST reminding you
that the BIOS has been restored to its default settings.
We recommend that you download and update to the latest BIOS version from the
ASUS website at www.asus.com after using the MemOK! function.

Table of Contents

Other manuals for Asus P9X79

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Asus P9X79 and is the answer not in the manual?

Asus P9X79 Specifications

General IconGeneral
Non-ECCYes
Memory channelsQuad-channel
Number of memory slots8
Supported memory typesDDR3-SDRAM
Maximum internal memory64 GB
Supported memory clock speeds1066, 1333, 1600, 1866, 2133, 2400 MHz
Processor socketLGA 2011 (Socket R)
Processor manufacturerIntel
Compatible processor seriesIntel® Core™ i7
Maximum number of SMP processors1
USB 2.0 connectors4
Number of SATA III connectors2
Number of Parallel ATA connectors0
USB 2.0 ports quantity6
Audio chipRealtek ALC892
Component forPC
Audio output channels7.1 channels
Motherboard form factorATX
RAID levels0, 1, 5, 10
Supported storage drive interfacesSATA II, SATA III
On-board graphics cardNo
Parallel processing technology supportQuad-GPU CrossFireX, Quad-GPU SLI
PCI Express x16 slots3
PCI Express slots version3.0
Controller interface typeIntel X79
Controller 2nd interface typeASMedia ASM1061
Trial softwareAnti-virus
Bundled softwareASUS Utilities ASUS Update
LAN controllerIntel® 82579V
Ethernet interface typeGigabit Ethernet
BIOS typeUEFI
ACPI version2.0a
BIOS memory size64 Mbit
Weight and Dimensions IconWeight and Dimensions
Depth244 mm
Width305 mm

Related product manuals