25
E
RS-232C command table
How to read the command table
Command: Command eld (See page 23.)
Direction: W When the “Parameter” is set in the parameter eld (See page 23.), the command functions as described
under “Control/Response Contents”.
R The returned value indicated under “Reply” can be obtained by setting “????” or “ ?” in the
parameter eld. (See page 23.)
Parameter: Parameter eld (See page 23.)
Reply: Response (Returned value)
*:
“●” indicates a command which can be used in power standby mode.
“–” indicates a command which cannot be used in power standby mode.
Power control
Function
Command Direction
Parameter Reply Control/Response contents *
POWER CONTROL POWR W 0
Switches to standby mode.
●
1 Returns from standby mode.
R 0 Standby mode
1 Normal mode
2 Input signal waiting mode
PICTURE menu
Function
Command Direction
Parameter Reply
Control/Response contents *
BRIGHT VLMP WR 0-31 0-31
-
CONTRAST CONT WR 0-60 0-60
BLACK LEVEL BLVL WR 0-60 0-60
TINT TINT WR 0-60 0-60
COLORS COLR WR 0-60 0-60
SHARPNESS SHRP WR 0-24 0-24
COLOR
ADJUSTMENT
COLOR MODE BMOD WR 0 0 STD
-
2 2 VIVID
3 3 sRGB
WHITE
BALANCE
THRU CTMP WR 0 0
PRESET 1-18 1-18
From 1: approximately 3,000K to 15: approximately 10,000K(500K steps)
16: approximately 5,600K, 17: approximately 9,300K,
18: approximately 3,200K
USER 99 99
R-CONTRAST CRTR WR 0-256 0-256 “ERR” when CTMP is not set to 99.
G-CONTRAST CRTG WR 0-256 0-256
B-CONTRAST CRTB WR 0-256 0-256
R-OFFSET OFSR WR -127-127 -127-127
G-OFFSET OFSG WR -127-127 -127-127
B-OFFSET OFSB WR -127-127 -127-127
COPY TO USER CPTU W 0 Copies a preset value to the user setting.
-
GAMMA GAMM WR 0-2 0-2 0: 1.8, 1: 2.2, 2: 2.4
-
5-6 5-6 5: 2.0, 6: STD
ADVANCED
RGB INPUT RANGE PDPR WR 0-2 0-2 0: AUTO, 1: FULL, 2: LIMITED
-
RESET ARST W 2
-
SETUP menu
Function
Command Direction
Parameter Reply Control/Response contents
*
LANGUAGE LANG WR 14 14
ENGLISH
-
1 1
DEUTSCH
2 2
FRANÇAIS
3 3
ITALIANO
4 4
ESPAÑOL
5 5
РУССКИЙ
6 6
AUDIO SELECT ASDI WR 1-2 1-2 1: DisplayPort, 2: STEREO MINI
-
AUDIO INPUT LEVEL AIVP WR 0-1 0-1 0: 1.0Vrms, 1: 0.5Vrms
-
BAUD RATE BAUD WR 0-2 0-2 0: 9600bps, 1: 19200bps, 2: 38400bps
-
DisplayPort STREAM DPST WR 0-1 0-1 0: SST, 1: MST
-
Controlling the Monitor with a PC (RS-232C)