3-18
Chapter 3: BIOS Setup
Chapter 3
HD Audio Controller
This item allows you to use the Azalia High Denition Audio Controller.
Conguration options: [Disabled] [Enabled]
USB Type C Power Switch
[Auto] The system will automatically detect your USB Type-C
®
devices and
provide suitable power if needed.
[Enabled] The USB Type-C
®
port will always provide power to your devices.
RGB LED lighting
When system is in working state
This item allows you to turn the RGB LED lighting on or off when the system is in the
working state.
Configuration options: [All On] [Stealth Mode]
Q-Code LED Function
[Disabled] Turn off Q-Code LED.
[POST Code Only] Show POST (Power-On Self-Test) code on Q-Code LED.
[Auto] Automatically display POST (Power-On Self-Test) code and
CPU temperature on Q-Code LED.
Intel LAN / LAN2 Controller
This item allows you to enable or disable the Intel LAN / LAN2 controllers.
Conguration options: [Enabled] [Disabled]
3.6.7 Onboard Devices Configuration
The items in this menu allow you to switch between PCIe Lanes and configure onboard
devices.
3.6.6 CPU Storage Configuration
The items in this menu allow you to configure CPU storage configurations.
• This menu will appear only when an Intel
®
Core™ X-series Processors (6-core or
above) is installed.
• Due to CPU behavior, CPU RAID functions with Intel
®
CPU RSTe only supports Intel
®
Core™ X-series Processors (6-core or above) and Intel
®
SSD modules.
3.6.8 APM Configuration
The items in this menu allow you to set system wake and sleep settings.
ErP Ready
This item allows you to switch off some power at S4+S5 or S5 to get the system ready for
ErP requirement. When set to [Enabled], all other PME options are switched off.
Conguration options: [Disabled] [Enable(S4+S5)] [Enable(S5)]