ASUS Pro WS X299 SAGE II
3-19
Chapter 3
3.6.10 HDD/SSD SMART Information
This menu displays the SMART information of the connected devices.
NVM Express devices do not support SMART information.
3.6.9 USB Configuration
The items in this menu allow you to change the USB-related features.
The Mass Storage Devices item shows the auto-detected values. If no USB device is
detected, the item shows None.
USB Single Port Control
This item allows you to enable or disable the individual USB ports.
Refer to section Motherboard layout for the location of the USB ports.
3.6.11 NVMe Configuration
This menu displays the NVMe controller and Drive information of the connected devices.
3.6.12 Thunderbolt(TM) Configuration
The items in this menu allow you to configure Thunderbolt settings.
TBT Root port Selector
This item allows you to select the thunder root port.
Conguration options: [Thunderbolt Disabled] [PCIEX16_2]
3.6.13 PCH-FW Configuration
This item allows you to configure the firmware TPM.
3.6.14 Network Stack Configuration
The items in this menu allow you to configure Ipv4 / Ipv6 PXE support.