ROG RAMPAGE VI EXTREME
3-19
Chapter 3
3.6.9 APM Configuration
The items in this menu allow you to set system wake and sleep settings.
ErP Ready
This item allows you to switch off some power at S4+S5 or S5 to get the system ready for
ErP requirement. When set to [Enabled], all other PME options are switched off.
Conguration options: [Disabled] [Enable(S4+S5)] [Enable(S5)]
3.6.10 Network Stack Configuration
The items in this menu allow you to congure Ipv4 / Ipv6 PXE support.
3.6.11 HDD/SSD SMART Information
This menu displays the SMART information of the connected devices.
NVM Express devices do not support SMART information.
RGB LED lighting
When system is in working state
This item allows you to turn the RGB LED lighting on or off when the system is in the
working state.
Conguration options: [On] [Off]
When system is in sleep, hibernate or soft off states
This item allows you to turn the RGB LED lighting on or off when the system is in the
sleep, hibernate or soft off states.
Conguration options: [On] [Off]
Wi-Fi 802.11ac / Wi-Fi 802.11ad Controller
This item allows you to enable or disable the Intel Wi-Fi 802.11ac / Wi-Fi 802.11ad
controllers.
Conguration options: [Disabled] [Enabled]
Bluetooth Controller
This item allows you to enable or disable the Intel Bluetooth controller.
Conguration options: [Disabled] [Enabled]
Intel LAN Controller
This item allows you to enable or disable the Intel LAN controller.
Conguration options: [Disabled] [Enabled]
10G LAN Card
This item allows you to enable or disable the 10G LAN card.
Conguration options: [Disabled] [Enabled]