EasyManuals Logo
Home>Asus>Motherboard>SABERTOOTH X58

Asus SABERTOOTH X58 User Manual

Asus SABERTOOTH X58
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #113 background imageLoading...
Page #113 background image
ASUS SABERTOOTH X58 4-15
Chapter 4
4.5 Creating a RAID driver disk
A oppy disk with the RAID driver is required when installing a Windows
®
operating system
on a hard disk drive that is included in a RAID set.
The motherboard does not provide a oppy drive connector. You have to use a
USB oppy disk drive when creating a SATA RAID driver disk.
Windows
®
XP may not recognize the USB oppy disk drive due to Windows
®
XP
limitation. To work around this OS limitation, refer to section 4.5.4 Using a USB
oppy disk drive.
4.5.1 Creating a RAID driver disk without entering the OS
To create a RAID/SATA driver disk without entering the OS
1. Boot your computer.
2. Press <Del> during POST to enter the BIOS setup utility.
3. Set the optical drive as the primary boot device.
4. Insert the support DVD into the optical drive.
5. Save changes and exit BIOS.
6. When the
Make Disk menu appears, press <a> or <b> to create a 32/64bit
Intel ICH10R RAID driver disk.
7. Insert a formatted oppy disk into the USB oppy disk drive, then press <Enter>.
8. Follow the succeeding screen instructions to complete the process.
4.5.2 Creating a RAID driver disk in Windows
®
To create a RAID driver disk in Windows
®
1. Start Windows
®
.
2. Plug the USB oppy disk drive and insert a oppy disk.
3. Place the motherboard support DVD into the optical drive.
4. Go to the
Make disk menu, and then click Intel ICH10R 32/64 bit RAID Driver Disk to
create an Intel
®
ICH10R RAID driver disk.
5. Select USB oppy disk drive as the destination disk.
6. Follow the succeeding screen instructions to complete the process.
Write-protect the oppy disk to avoid a computer virus infection.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Asus SABERTOOTH X58 and is the answer not in the manual?

Asus SABERTOOTH X58 Specifications

General IconGeneral
Non-ECCYes
Memory channelsTriple-channel
Number of memory slots6
Supported memory typesDDR3-SDRAM
Maximum internal memory24 GB
Supported memory clock speeds1066, 1333, 1600, 1800, 1866 MHz
System bus rate6.4 GT/s
Processor socketSocket B (LGA 1366)
Processor manufacturerAMD
Compatible processor seriesIntel Core i7, Intel Core i7 Extreme Edition
USB 2.0 connectors3
Number of COM connectors1
Number of SATA III connectors2
Number of Parallel ATA connectors0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Audio chipRealtek ALC892
Component forPC
Motherboard chipsetIntel® X58
Audio output channels7.1 channels
Motherboard form factorATX
Motherboard southbridgeIntel ICH10R
Motherboard chipset familyIntel
RAID levels0, 1, 5, 10
Supported storage drive interfacesSATA II, SATA III
On-board graphics cardNo
Parallel processing technology supportQuad-GPU CrossFireX, Quad-GPU SLI
PCI Express slots version2.0
Ethernet interface typeGigabit Ethernet
BIOS typeAMI
ACPI version2.0a
BIOS memory size16 Mbit
Cables includedSATA
Controller 2nd interface typeMarvell PCIe 9128/JMicron JMB362
Weight and Dimensions IconWeight and Dimensions
Depth305 mm
Width244 mm

Related product manuals