EasyManuals Logo
Home>Asus>Motherboard>SABERTOOTH X58

Asus SABERTOOTH X58 User Manual

Asus SABERTOOTH X58
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #119 background imageLoading...
Page #119 background image
ASUS SABERTOOTH X58 5-3
Chapter 5
5.1.4 Installing three CrossFireX™ graphics cards
1. Prepare three CrossFireX-ready graphics cards.
2. Insert the three graphics card into the PCIEX16 slots. If your motherboard has more
than three PCIEX16 slots, refer to Chapter 2 in this user manual for the locations of the
PCIEX16 slots recommended for multi-graphics card installation.
3. Ensure that the cards are properly seated on the slots.
4. Align and rmly insert the two CrossFireX
bridge connectors to the goldngers
on each graphics card. Ensure that the
connectors are rmly in place.
5. Connect three independent auxiliary
power sources from the power supply to
the three graphics cards separately.
6. Connect a VGA or a DVI cable to the
graphics card.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Asus SABERTOOTH X58 and is the answer not in the manual?

Asus SABERTOOTH X58 Specifications

General IconGeneral
Non-ECCYes
Memory channelsTriple-channel
Number of memory slots6
Supported memory typesDDR3-SDRAM
Maximum internal memory24 GB
Supported memory clock speeds1066, 1333, 1600, 1800, 1866 MHz
System bus rate6.4 GT/s
Processor socketSocket B (LGA 1366)
Processor manufacturerAMD
Compatible processor seriesIntel Core i7, Intel Core i7 Extreme Edition
USB 2.0 connectors3
Number of COM connectors1
Number of SATA III connectors2
Number of Parallel ATA connectors0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Audio chipRealtek ALC892
Component forPC
Motherboard chipsetIntel® X58
Audio output channels7.1 channels
Motherboard form factorATX
Motherboard southbridgeIntel ICH10R
Motherboard chipset familyIntel
RAID levels0, 1, 5, 10
Supported storage drive interfacesSATA II, SATA III
On-board graphics cardNo
Parallel processing technology supportQuad-GPU CrossFireX, Quad-GPU SLI
PCI Express slots version2.0
Ethernet interface typeGigabit Ethernet
BIOS typeAMI
ACPI version2.0a
BIOS memory size16 Mbit
Cables includedSATA
Controller 2nd interface typeMarvell PCIe 9128/JMicron JMB362
Weight and Dimensions IconWeight and Dimensions
Depth305 mm
Width244 mm

Related product manuals