1-2 Chapter 1: Product introduction
1.3 Monitor introduction
1.3.1 Front view
1
2
3
4
5
1. ( 5-way) button:
• Turns on the OSD menu. Enacts the selected OSD menu item.
• Increases/Decreases values or moves your selection up/down/left/right.
• Displays the input selection menu when the monitor enters standby mode
or displays the “NO SIGNAL“ message.
• Toggles the Key Lock function between on and off by pressing the down
button for more than 5 seconds.
2. button
• Exits the OSD menu item.
• Displays the input selection menu when the monitor enters standby mode
or displays the “NO SIGNAL“ message.
3. Shortcut 1 button:
• Default: GamePlus.
• To change the shortcut function, go to the MyFavorite > Shortcut >
Shortcut 1 menu.
• Displays the input selection menu when the monitor enters standby mode
or displays the “NO SIGNAL“ message.
4. Shortcut 2 button:
• Default: GameVisual.
• To change the shortcut function, go to the MyFavorite > Shortcut >
Shortcut 2 menu.
To Next Page
Loading...
Need help?
General