Atag A203C User Manual

ATAG A-Serie
16
The Benchmark Scheme
ATAG Heating UK Ltd is a licensed member of
the Benchmark Scheme which aims to improve
the standards of installation and commissioning
of domestic heating and hot water systems in the
UK and to encourage regular servicing to optimise
safety, efciency and performance.
Benchmark is managed and promoted by the
Heating and Hotwater Industry Council. For more
information visit www.centralheating.co.uk
Please ensure that the installer has fully comple-
ted the Benchmark Checklist on the inside back
pages of the installation instructions supplied with
the product and that you have signed it to say that
you have received a full and clear explanation of
its operation. The installer is legally required to
complete a commissioning checklist as a means
of complying with the appropriate Building Regu-
lations (England and Wales).
All installations must be notied to Local Area
Building Control either directly or through a Com-
petent Persons Scheme. A Building Regulations
Compliance Certicate will then be issued to the
customer who should, on receipt, write the Noti-
cation Number on the Benchmark Checklist.
This product should be serviced regularly to opti-
mise its safety, efciency and performance. The
service engineer should complete the relevant
Service Record on the Benchmark Checklist after
each service.
The Benchmark Checklist may be required in the
event of any warranty work and as supporting
documentation relating to home improvements
in the optional documents section of the Home
Information Pack.“

Atag A203C Specifications

General

Type	-
Fuel type	Natural gas
Boiler system	Combi boiler system
Product color	White
Heater location	Indoor
Placement supported	Vertical
Boiler type (NL label)	HR
HR inspection label class	107
Maximum power	20000 W
Minimum power	4400 W
Water flow (60 °C)	6 l/min
Domestic Hot Water (DHW) flow	10.7 l/min

Weight and Dimensions

Depth	395 mm
Width	500 mm
Height	650 mm
Weight	37000 g