Atag OX9011T User Manual

GB 25
general
safety
This appliance may only be connected by a registered
installer.
This built-in oven has been designed for domestic use. Use it
only for the preparation of food.
electrical
connection
230 V AC – 50 Hz – 3,4 kW
You should always comply with national and local regulations
for the electrical connection. These stipulate, among other
things, that the appliance should be earthed.
The house mains to which the appliance is connected must
comply with the national and local regulations.
Connect the appliance to a wall socket which has been
installed in accordance with the regulations in force. The wall
socket and plug should be accessible at all times.
Warning: The appliance should always be earthed.
Wiring diagram: On the upper side of the appliance there is
a label with the wiring diagrams on it.
Attention: The connected load and the mains voltage
required are specified on the data plate.
The connection should be made in accordance with the
national and local regulations.
Fixed connection: If you wish to make a fixed connection, it
should be fitted with an multi-polar isolating switch with a
minimum contact separation of 3 mm.
Mains connection: Use a good quality connection cable for
the connection (for example, H 05 VV -F or equivalent.
Maintenance: When maintenance is carried out on it, the
oven should be disconnected from the power supply, either
by removing the plug from the socket or by removing the
fuse from the meter cupboard.
AEP_082368400_OX9011T 01-12-2005 14:48 Pagina GB 25

Atag OX9011T Specifications

General

Adjustable thermostat	Yes
Oven type	Electric
Oven thermostat range	50 - 270 °C
Total oven(s) interior capacity	70 L
Control type	Rotary
Product color	Silver
Timer type	Digital
Power consumption (typical)	2950 W

Weight and Dimensions

Depth	480 mm
Width	895 mm
Height	546 mm