If the tool is equipped with a reaction bar
The reaction bar is designed for absorbing the reaction torque of assembly power tools.
No other use is permitted. For professional use only.
Technical data
8431017011Ordering No
EBL12Model
1/4" HexBit drive
M2-3Screw capacity
StraightModel type
ClutchShut-off system
N/A dB(A)Sound power
<70 dB(A)Sound pressure
ISO15744Sound standard
N/A dB(A)Sound uncertainty
910 r/minSpeed range
0.2-1.2 NmTorque range
1.8-10.6 in lbTorque range
30 V d.c.Motor voltage
70 WMotor power
ISO28927-2Vibration standard
N/A m/s²Vibration uncertainty
<2.5 m/s²Vibration value
0.5 kgWeight
1.1 lbWeight
Service intervals
Service recommendations
Overhaul and preventive maintenance is recommended at regular intervals. If the machine is not working
properly, it should immediately be taken out of operation for inspection. At the overhauls, all parts should be
cleaned accurately and defective or worn parts should be replaced.
© Atlas Copco Industrial Technique AB - 9836 8184 00
4
EBL12ENProduct information
To Next Page
Loading...
Need help?
General
