2 General description
2.1 Introduction
Introduction
G 2, G 3, G 4, G 5 and G 7 are air-cooled, single-stage, oil-injected screw compressors, driven
by an electric motor.
The compressors are belt driven.
The compressors are enclosed in sound-insulating bodywork.
An easy-to-operate control panel is provided, including the electronic Base controller and the
emergency stop button. A cabinet housing the controller, pressure sensor and motor starter is
integrated into the bodywork.
Pack versions do not include an air dryer.
Full-Feature versions are fitted with an air dryer (DR). The dryer removes moisture from the
compressed air by cooling the air to near the freezing point and automatically draining the
condensate.
Floor-mounted model
The compressor is installed directly on the floor.
G 5, floor-mounted
Ref. Description
1 Electric cabinet
Instruction book
2920 7199 10 11
To Next Page
Loading...
Need help?
General
