Atlas Copco GA 37+ User Manual

144
Instruction book
9096 3321 00
11.8 Technical data Elektronikon® controller
General
Digital outputs
Digital inputs
Analog inputs
Parameter Value
Pressure inputs 2 (Elektronikon® Graphic controller-p.n. 1900 520010 .... 1900 5200 19)
Temperature inputs 5 (Elektronikon® Graphic controller-p.n. 1900 520010 .... 1900 5200 19)
Parameter Value
Number of
outputs
9 (Elektronikon® Graphic controller-p.n. 1900 5200 10..... 1900 5200 19)
Type Relay (voltage free contacts)
Rated voltage AC 250 V AC /10 A max.
Rated voltage DC 30 V DC /10 A max.
Parameter Value
Number of inputs 10 (Elektronikon® Graphic controller- p.n. 1900 5200 10 .... 1900 5200 19)
Supply by
controller
24 VDC
Supply protection Short circuit protected to ground
Input protection Not isolated
Parameter Value
Supply voltage 24 V AC /16 VA 50/60Hz (+40%/-30%) 24 V DC/0.7 A
Type of protection IP54 (front) IP21 (back)
Ambient and temperature
conditions
IEC60068-2
Temperature range
Operating -10°C…..+60°C
Storage -30°C…..+70°C
Permissible humidity Relative humidity 90% No condensation
Noise emission IEC61000-6-3
Noise immunity IEC61000-6-2
Mounting Cabinet door

Atlas Copco GA 37+ Specifications

General

Model	GA 37+
Category	Air Compressor
Motor Power	37 kW
Cooling System	Air-cooled
Drive Type	Direct drive
Working Pressure	7.5-13 bar
Noise Level	69 dB(A)