Atlas Copco LT2 User Manual

Instruction book
1 Leading particulars
1.1 General description
LE, LF and LT are air-cooled, single-acting piston compressors. LE and LT are lubricated compressors;
LF are oil-less compressors which deliver oil-free air. LF2 up to LF5, LE2 up to LE7 and LE10 50 Hz are
single-stage compressors; LE10 60 Hz, LE15, -20, LF7, -10 and LT are two-stage compressors.
LT and LE/LF2 up to -7 and LE10 50 Hz are two-cylinder compressors, LE10 60 Hz, LF10, LE15, -20 are
three-cylinder compressors.
Note: Take care that three-cylinder compressors rotate in the direction as indicated by the arrow on the
fan housing (counter-clockwise seen from fan cowl side).
LE/LF are built for effective working pressures up to 10 bar. LT are built for effective working pressures up
to 30 bar (LT2 only for 15 and 20 bar).
Fig. 1.1 Compressor Block with unloading valve Fig. 1.2 Power Pack with unloading valve
2920 1585 00 - 5 -

Atlas Copco LT2 Specifications

General

Brand	Atlas Copco
Model	LT2
Category	Air Compressor
Language	English