OWNER’S MANUAL
AtlasSound.com
1601 JACK MCKAY BLVD. • ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333 • FAX (800) 765-3435
ATS003101 RevA 8/08
16
Specifications are subject to change without notice
AA60 MIXER AMPLIFIER
OWNER’S MANUAL
Wiring the AA60
Speaker Outputs - Use 2 conductor unshielded wire of the appropriate gauge. If you are unsure about this,
contact Atlas Sound Tech Support at 1-800-876-3333. Make sure you know how many speakers you need and
what tap value you intend to use.
Mic/Line Input - Use 2 conductor with shield for low level signals of 20 - 22-gauge is best. Maintain the proper
polarity, + to +, – to – , and shield to ground.
Unbalanced Inputs and Outputs - Pre-made RCA cables can be purchased from vendors to simplify
interconnection to external devices.
Zone 2 Out - Use 2 conductor, 20 - 22-gauge, shielded is best. Terminate the shield at the input to the device if
possible.
Security Cover Option
In order to prevent unauthorized operation of the AA60, optional security covers are available which take the
place of the front panel knobs. After the AA60 has been installed and is operating as desired, grasp the front
panel knobs and pull straight out from the front panel. Replace the knobs with security covers, Atlas Sound
part number AAVCC-5, available in quantities of 5.
Power
On
Off
Signal PowerPeak
Treble
n
Bass
Input 3Input 2Input 1
n
On
Off
Low cut
8
On
Off
43
21
Phantom
Mute Rcv
Off
On
Off
On
Off
On
Off
On
5
Zone 2 Assign
6
Input 3 Input 2 Input 1
Input1
7
Input 2
Input 3
Line/Tel
Mic
Off
On
Unswitched Outlet
120V AC 60Hz
Max 500W
Outlet Breaker
125V AC 4A
Push Reset
120V AC 60Hz 100W
Amp In
Line Out A
Line Out B
Pre Out
Input 3 Input 2
L
R
Zone2
100
Level
Mute
Sens
100
Remote
Mute
G - +
Input 1
Ω
8
1W
Ω
600
Zone 2 Out
- +- +
Speaker Output 60W
COM
25V
Ω
8
70V
L
R
," /
77,&C_n[h7cfb_\_[h
£Èä£Ê>VÊV>ÞÊÛ`°]ÊÃ]Ê/8ÊÇx££Ê
nää®ÊnÇÈÎÎÎÎÊÌ>Ã-Õ`°V
77,&
7jbWiIekdZ77I[h_[iC_n[h7cfb_\_[h
CLASS 2 WIRING
Front Panel
Knob
or
Security Cover
To Next Page
Loading...
Need help?
General
