EasyManuals Logo
Home>AudioCodes>Gateway>MediaPack MP-118

AudioCodes MediaPack MP-118 Fast Track Guide

AudioCodes MediaPack MP-118
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
MediaPack
Analog Fast Track Guide 8 Document #: LTRT-59802
2 Installing the MediaPack
This section provides information on the installation procedure for the MP-11x (refer to Section
2.1 below) and the MP-124 (refer to Section Error! Reference source not found. on page
Error! Bookmark not defined.). For information on configuring the gateway, refer to Section 3
on page 13.
Warning: The unit is supplied as a sealed unit and must only be installed and serviced
by qualified service personnel.
Warning: Units providing power sockets with three pins must be connected by service
personnel to a socket-outlet with a protective earthing connection.
2.1 Installing the MP-11x
¾ To install the MP-11x, take these 4 steps:
1. Unpack the MP-11x (refer to Section 2.1.1 below).
2. Check the package contents (refer to Section 2.1.2 below).
3. Mount the MP-11x (refer to Section 2.1.4 on page 9).
4. Cable the MP-11x (refer to Section 2.1.5 on page Error! Bookmark not defined.).
After connecting the MP-11x to the power source, the Ready and Power LEDs on the front panel
turn to green (after a self-testing period of about 2 minutes). Any malfunction in the startup
procedure changes the Fail LED to red and the Ready LED is turned off (refer to Table 6-1 on
page 27 for details on the MP-11x LEDs).
When you have completed the above relevant sections you are then ready to start configuring the
gateway (Section 3 on page 13).
2.1.1 Unpacking
¾ To unpack the MP-11x, take these 6 steps:
1. Open the carton and remove the packing materials.
2. Remove the MP-11x gateway from the carton.
3. Check that there is no equipment damage.
4. Check, retain and process any documents.
5. Notify AudioCodes or your local supplier of any damage or discrepancies.
6. Retain any diskettes or CDs.
2.1.2 Package Contents
Ensure that in addition to the MP-11x, the package contains:
AC power cable.
Small plastic bag containing four anti-slide bumpers for desktop installation.
A CD with software and documentation may be included.
This MediaPack Fast Track Installation Guide.

Table of Contents

Other manuals for AudioCodes MediaPack MP-118

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes MediaPack MP-118 and is the answer not in the manual?

AudioCodes MediaPack MP-118 Specifications

General IconGeneral
BrandAudioCodes
ModelMediaPack MP-118
CategoryGateway
LanguageEnglish

Related product manuals