5. Disposal
Do not dispose this product as unsorted municipal waste. Collection of such waste
separately for special treatment is necessary.
It is prohibited to dispose of this appliance in domestic household waste.
For disposal, there are several possibilities:
A) The municipality has established collection systems, where electronic waste can be disposed of at
least free of charge to the user.
B) When buying a new product, the retailer will take back the old product at least free of charge.
C) The manufacture will take back the old appliance for disposal at least free of charge to the user.
D) As old products contain valuable resources, they can be sold to scrap metal dealers.
Wild disposal of waste in forests and landscapes endangers your health when hazardous substances
leak into the ground-water and find their way into the food chain.
When using this air conditioner in the European countries, the follow information must be
followed:
Disposal:
51
Error code list:
TROUBLESHOOTING AND DISPOSAL
Error code TIMER indicator Description
E1 1 blink Indoor room temperature sensor fault (Ta)
E2 2 blinks Outdoor coil temperature sensor fault (Tcm or Tdef)
E3 3 blinks Indoor coil temperature sensor fault (Tem)
E4 4 blinks Indoor fan motor or DC motor feedback fault
E5/5E 5 blinks Indoor & outdoor communication fault
F0 10 blinks Outdoor DC Fan motor fault
F1 11 blinks IPM module fault
F2 12 blinks PFC module fault
F3 13 blinks Compressor start fault
F4 14 blinks Exhaust temperature sensor fault (Td)
F6 16 blinks Outdoor room temperature sensor fault (Tao)
F7 17 blinks Over / under voltage protection
F8 18 blinks Main PCB & Inverter communication fault
F9 19 blinks Outdoor EEPROM fault
J3/P3 20 blinks Refrigerant leakage detection
FA 21 blinks Suction temperature sensor fault (Ts)
J8/P8 22 blinks Outdoor over current protection
J5/P5 23 blinks Compressor high exhaust temperature protection
J4/P4 24 blinks High pressure protection failure
H8 25 blinks Four way valve fault
H1 26 blinks Dranaige failure
H2 27 blinks Remote control communication fault
H5 28 blinks Compressor exhaust temperature is too low protection
H6 29 blinks Low voltage swithc fault
H7 30 blinks Low pressure protection
Evaporator inlet temperature sensor fault (Tiq)
H3 31 blinks Evaporator inlet temperature sensor fault (Tiq)
H4 32 blinks Evaporator outlet temperature sensor fault (Tas)
H9 33 blinks Indoor & outdoor communication line fault dislocation
To Next Page
Loading...
Need help?
General