Axon AX1023 User Guide

Axon Body 3 Camera User Guide
Axon Enterprise, Inc. Page 6 of 26
Getting to know your Axon Body 3 Camera
The Axon Body 3 camera includes physical controls to enable video and audio capture while
providing visual, audible, and vibration notifications of the Axon Body 3 camera’s state of
operation.
The following images show the different components on the Axon Body 3 camera.
Axon Body 3 Camera front
Power – Turns the camera’s power on or off.
To power on the camera, press Power until you feel a short vibration. The camera starts,
emits two short rising-pitch tones with a long vibration and then enters Ready (Buffering)
mode.
To power off the camera, press and hold Power for three seconds. The camera emits three
short lowering-pitch tones with a long vibration when powering off. The camera might take
several additional seconds to close out of the video if it is powered off before stopping a
recording.
Lens – The camera lens.
Speaker – Provides audio notifications.
Volume Up  – Increases speaker volume, turn off the camera lights, and exit stealth mode.
Select – Used to mute audio recording, to add markers to the video during recording, and
activate display backlight.
Volume Down  – Decreases speaker volume and enter or exit stealth mode.
Microphones – For recording audio.
Event – Used to start and stop recording. Double-press to start recording. Press and hold for
3 seconds to stop recording and return to Ready (buffering) mode.
Volume Up

Volume Down

Select
Program
Lens
Speaker
Event
Microphone
Microphone
Power (top)
Triad LED

Axon AX1023 Specifications

General

Brand	Axon
Model	AX1023
Category	Digital Camera
Language	English