Axon Body 3 Camera User Manual
Axon Enterprise, Inc. Page 19 of 44
Sleep Mode is useful for situations where camera users may need momentary privacy. The
user can enter Sleep Mode from the buffering state in less than 4 seconds, as opposed to
turning the camera completely off. Similarly, the camera will exit Sleep Mode and enter a
buffering or recording state in less than 4 seconds.
The device audit trail reflects when Sleep Mode is entered and exited. While Sleep Mode can
be used an alternative to completely powering down the camera during private situations, it
should not be considered a replacement for powering the camera off. Certain background
processes are running while the camera is in Sleep Mode and the battery will still deplete
while in this mode, just at a slower rate.
Entering and Exiting Sleep Mode
To enter Sleep Mode:
1. Presses the Power button. The camera display shows PRESS SELECT TO ENTER SLEEP.
2. Within 3 seconds, press the Select Button to confirm. The camera display shows a
crescent moon icon to show it is in Sleep Mode.
To exit Sleep Mode:
• Press the Power button to return the camera to buffering state.
• Double-press the Event button to begin recording.
To Next Page
Loading...
Need help?
General
