Check digit verification: The MSI/Plessey has one or two optional check digits. There are three
methods of verifying check digits, i.e. Mod10, Mod10/10 and Mod 11/10. The check digit 1 and check
digit 2 will be calculated as the sum module 10 or 11 of the data digits.
Check digit transmission: By setting Enable, check digit 1 and check digit 2 will be transmitted upon
your selected check digit verification method.
Max./Min. code length: Refer to Max./Min. code length of 3-20 Code 39.
Code ID setting: Refer to Code ID setting of 3-15 UPC-A.
Insertion group selection: Refer to Insertion group selection of 3-15 UPC-A.
To Next Page
Loading...
Need help?
General
