Azbil Corporation
Model: AMT, HDT - CV3000 Series Control Valves
33
6. DIRECT/REVERSE ACTION TYPE CONVERSION AND
SPRING RANGE CHANGE OF ACTUATOR
6.1 Direct/Reverse Action Change
As a general rule it is most recommendable to prepare separately the direct type and
reverse type of actuators and not to convert actuators into different types. However,
when it has become unavoidable to convert actuators into other types, conversions
may be done by using the parts mentioned below (Table 6-1 and Table 6-2). The
parts marked “+” are the ones which are newly needed and those marked “-” are
ones which are not used.
Table 6-1 To Convert the Direct-Action Thpe into the Reverse Action Type
PSA1D -> PSA1R
Parts neme Q’ty
Rod unite +1
82559228-102 14.3mm
82559228-101 25mm
Rod -1
82559229-102 14.3mm
82559229-101 25mm
Seal washer +4 82521069-101
Rod packing +1 82521067-102
Rain cap +1 82553334-101
Washer +1 82592235-596
“O” ring +1 82553318-101
HA2D -> HA2R
Part name Q’ty For stroke 14.3mm, 25mm For stroke 38mm
Seal washers +2 82521069-101 82521069-101
Rod packing +1 82521067-101 82521067-101
Rod unit +1
82521431-101 (14.3mm)
82521431-103
82521431-102 (25mm)
Rain cap +1 82553334-101 82553334-101
Rod (-1)
82521427-101 (14.3mm)
82521427-103
82521427-102 (25mm)
HA3D -> HA3R
Part name Q’ty For stroke 14.3mm For stroke 25mm, 38mm For stroke 38mm
Seal washers +2 82521069-102 82521069-102 82521069-102
Rod packing +1 82521067-102 82521067-102 82521067-102
Rod unit +1 82521431-201
82521431-202 (25mm)
82521431-204
82521431-203 (38mm)
Rain cap +1 82553334-101 82553334-101 82553334-101
Rod (-1) 82521428-101
82521428-102 (25mm)
82521428-104
82521428-103 (38mm)
HA4D -> HA4R
Part name Q’ty For stroke 25mm
For stroke
38mm, 50mm, 75mm
Seal washers +2 82521069-103 82521069-103
Rod packing +1 82521067-103 82521067-103
Rod unit +1 82521431-302 82521431-303
Rain unit (-1) 82521429-102
82521429-103 (38mm)
82521429-104 (50mm)
82521429-105 (75mm)
Rain cap +1 82553334-101 82553334-101
Flat washers (-2) 82592131-201 82592131-201