7219722 - 01 (04/15) MainEco Heat 13
Description of the Product 4
4 Description of the Product
4.1 General Description
1. The Baxi MainEco Heat is a wall mounted condensing boiler
which is room sealed and fan assisted, and will serve central
heating and stored domestic hot water
2. The boiler will be one of the following outputs:-
15 kW
18 kW
24 kW
3. The boiler is factory set for use only on Natural Gas (G20).
4. The boiler model, serial number and Gas Council number are
shown on the information label under the boiler (Fig. 3). This is
for user reference.
Fig. 3
Information
Label
4.2 Operating Principle
Slide
Forward
4.2.1 In Operation
1. Whilst the boiler is in operation cooled flue gases are
discharged through the flue gas discharge pipe. This may
appear as a cloud of steam which is normal.
2. Condensed water is discharged from the boiler heat
exchanger into a pipe (the condensate drain). This pipe must
never be altered or re-routed except by a qualified professional.
To Next Page
Loading...
Need help?
General