EasyManuals Logo
Home>Beckhoff>Engine>AM8100 Series

Beckhoff AM8100 Series User Manual

Beckhoff AM8100 Series
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Handling
Synchronous servomotor 11Version: 2.1
4 Handling
4.1 Transport
Climate category: 2K3 according to EN 60721
Transport temperature: -25 °C - +70 °C, max. fluctuation 20 K/hour
Transport humidity: relative humidity 5% - 95%, non-condensing
The servomotor may only be transported by qualified personnel and in the manufacturer's original
recyclable packaging.
Avoid hard impacts, particularly at the shaft end.
If the packaging is damaged, check the motor for visible damage. Inform the transport company and, if
necessary, the manufacturer.
4.2 Packaging
The max. stacking height by the servo motors AM8100 is 10 cardboard packaging.
4.3 Storage
Climate category 2K3 according to EN 60721
Storage temperature: -25 °C - +70 °C, max. fluctuation 20 K/hour
Air humidity: relative humidity 5% - 95%, non-condensing
Max. stacking height: see table Packaging
Storage time: without limitation
Store only in the manufacturer’s original recyclable packaging
4.4 Maintenance / Cleaning
Maintenance and cleaning only by qualified personnel.
The ball bearings have a grease filling with a service life of 30,000 hours under normal operating
conditions. The bearings should be replaced after 30,000 hours of operation under rated conditions.
Check the motor for bearing noise every 2,500 operating hours or once per year. If any noises are
heard, stop the operation of the motor. The bearings must be replaced.
In motors with optional shaft seal ring the ring must be lubricated every 5,000 hours. We recommend
„Mobilgrease
TM
FM 222“ from Mobil.
Opening the motor invalidates the warranty.
Clean the housing with isopropanol or similar.
Never immerse or spray the servomotor.
4.5 Disposal
In accordance with the WEEE 2012/19/EU Directives we take old devices and accessories back for
professional disposal, provided the transport costs are taken over by the sender.
Send the devices with the note “For disposal” to:
Beckhoff Automation GmbH & Co. KG
Huelshorstweg 20
D-33415 Verl

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Beckhoff AM8100 Series and is the answer not in the manual?

Beckhoff AM8100 Series Specifications

General IconGeneral
BrandBeckhoff
ModelAM8100 Series
CategoryEngine
LanguageEnglish

Related product manuals