Beckhoff AX5000 Series User Manual

4 Product description BECKHOFF Drive Technology
28 Version 6.2 AX5000
4.7.9 X13 (channel A) , X23 (channel B) - motor connection (power)
(AX5101 - AX5125 und AX520x)
Terminal point Connection
Tightening torque
(Knurled screw)
U
Motor connection U
0,6 Nm
V
Motor connection V
W
Motor connection W
PE
Protective conductor
Shroud
Screen
4.7.10 X13 - motor connection (power - only AX5140)
Terminal
point
Connection
Tightening torque
(Knurled screw)
U
Motor connection U
1.0 Nm
V
Motor connection V
W
Motor connection W
PE
Protective conductor
Shroud
Screen
Attention
Grounding shield!
The grounding shield of the motor is connected via the shield plate in the
motor connector. Please tighten the knurled screws of the motor connector
with a screwdriver. It is possible that some feedback problems may caused
due to a poor shield connection of the motor.
4.7.11 X14 (channel A), X24 (channel B)-motor brake, thermal contact, OCT
AX5000-xxxx-0000 (Hardware 1)
Terminal
point
Connection Output current
Conductor
cross-section
Tightening
torque
T-
Temp. - *
0.2 – 1.5 mm
2
0.2 – 0.25 Nm
T+
Temp. + *
PE
Signal pair
screen
B-
Brake GND
B+
Brake (U
p
) +
1.5 A max.

Beckhoff AX5000 Series Specifications

General

Brand	Beckhoff
Model	AX5000 Series
Category	Servo Drives
Language	English