EasyManuals Logo
Home>Beckhoff>Servo Drives>AX5118

Beckhoff AX5118 Startup Manual

Beckhoff AX5118
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
BECKHOFF Drive Technology 3 Guidelines and Standards
AX5000 Version : 4.5 13
3.3 UL-Listing in USA and Canada
The following servo drives from the AX5000 series have a UL-Listing and must bear the
CUS symbol
AX5000 with UL-Listing
AX5101, AX5103, AX5106, AX5112, AX5118, AX5125, AX5140, AX5201,
AX5203 und AX5206
on the name plate. If you wish to operate an AX5000 in USA or Canada , please check that
there is a CUS symbol on the name plate.
Below is a list of the relevant chapters that are amended with respect to the UL-Listing.
Furthermore, UL-specific remarks are listed. It is essential to observe these specifications.
3.3.1 UL-specific chapter changes
5.2.1 Mains supply connection (X01)”
AX5000 shall be connected only to a grounded wye-source where the
maximum voltage does not exceed 277 V to ground.
5.2.3 Connection of several servo drives to form a drive system
Drive system with UL-Listing!
Please consult our Application Department with respect to the requirements
for a drive system with UL-Listing.
3.3.2 UL-specific chapter
5.2.1.3 External protection, UL-compliant
Integral solid state short circuit protection does not provide branch circuit protection. Branch
circuit protection must be provided in accordance with the Manufacture Instructions, National
Electrical Code and any additional local codes.
Suitable for use on a circuit capable of delivering not more than 18000 rms symmetrical
amperes, 480 V maximum, when protected by RK5 class fuses.
Single-phase
Fusing
AX5101
AX5103
AX5106
AX5201
AX5203
AX5206
AC supply (max.)
*)
6 A
12 A
20 A
12 A
20 A
20 A
24 V supply (max.)
3 A
Brake resistor
electronic
*) Mains fuses according to type “RK5” must be used.
Three-phase
Fusing
AX
5101
5103
5106
5112
5118
5125
5140
5201
5203
5206
AC suppl (max.)
*)
6 A
12 A
20 A
20 A
35 A
45 A
80 A
12 A
20 A
20 A
24 V supply (max.)
3 AT
Brake resistor
elektronisch
*) Mains fuses according to type “RK5” must be used.

Table of Contents

Other manuals for Beckhoff AX5118

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Beckhoff AX5118 and is the answer not in the manual?

Beckhoff AX5118 Specifications

General IconGeneral
BrandBeckhoff
ModelAX5118
CategoryServo Drives
LanguageEnglish

Related product manuals