Beckhoff AX5118 Startup Manual

4 Product description BECKHOFF Drive Technology
26 Version : 4.5 AX5000
4.7.9 X13 (channel A) , X23 (channel B) - motor connection (power)
(AX5101 - AX5125 und AX520x)
Terminal point
Connection
U
Motor connection U
V+
Motor connection V
W
Motor connection W
PE
Protective conductor
Shroud
Screen
4.7.10 X13 - motor connection (power - only AX5140)
Terminal point
Connection
U
Motor connection U
V+
Motor connection V
W
Motor connection W
PE
Protective conductor
Shroud
Screen
Attention
Grounding shield!
The grounding shield of the motor is connected via the shield plate in the
motor connector. Please tighten the knurled screws of the motor connector
with a screwdriver. It is possible that some feedback problems may caused
due to a poor shield connection of the motor.
4.7.11 X14 (channel A), X24 (channel B)-motor brake, thermal contact, OCT
AX5000-xxxx-0000 (Hardware 1)
Terminal point
Connection
Output current
T-
Temp. - *
T+
Temp. + *
PE
Signal pair screen
B-
Brake GND
B+
Brake (U
p
) +
1.5 A max.
*) Switch, KTY 83-1xx or KTY 84-1xx

Beckhoff AX5118 Specifications

General

Brand	Beckhoff
Model	AX5118
Category	Servo Drives
Language	English