Beckhoff CX2040 User Manual

Product overview
• CX20x0B310 = PROFIBUS slave, DSub socket, 9pin
• CX20x0M510 = CANopen master, DSub connector, 9pin
• CX20x0B510 = CANopen slave, DSub connector, 9pin
• CX20x0M930 = PROFINET RT, controller, Ethernet (2 x RJ45)
• CX20x0B930 = PROFINET RT, device, Ethernet (2 x RJ45 switch)
• CX20x0B950 = EtherNet/IP Slave, Ethernet (2 x RJ45 switch)
The software
In combination with the TwinCAT automation software, the CX20x0 Industrial PC becomes a powerful IEC
611313 PLC with up to four user tasks. Additionally, Motion Control tasks can also be executed. Depending
on the required cycle time, several servo axes can be controlled. Even special functions such as flying saw,
electronic gearbox and cam plate can be realised.
CX2020, CX2030, CX204010
Version 1.2

Beckhoff CX2040 Specifications

General

Brand	Beckhoff
Model	CX2040
Category	Industrial PC
Language	English