EasyManuals Logo
Home>Beeper>Scooter>Cross

Beeper Cross Installation & Use Manual

Beeper Cross
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
BATTERY
17
1. Battery safety instructions
The battery should be kept out of the reach of children. If any battery components are swallowed, seek medical
attention immediately.
Before first use, please charge your battery to the maximum.
Please recharge your battery before it is completely discharged.
To have complete satisfaction with your vehicle, please ensure that it is loaded to at least 50%.
If you store your vehicle, please ensure that the battery is between 30 and 40% autonomy.
Please do not exceed 30 days without recharging your battery.
Please use the supplied charger that matches your vehicle's battery.
Please do not store your vehicle below 0 ° C or in direct sunlight.
Improper charging, damage, humidity or overheating can emit smoke, explode, cause a strong heat source or start
a fire on the battery.
Do not leave your vehicle to charge unattended.
Do not use the battery if the battery is damaged, then please replace it. To reduce the risk of fire or burns, do not
dispose of it with household garbage. In order to preserve the environment, the battery must be deposited at the
collection points in force.
To keep your EDP working properly, we recommend that you charge the battery after each use. Here are some
maintenance tips for your safety and to help optimize the life of your product.
To charge your EDP, connect the charger tip to the space indicated on the battery, then the outlet to the mains.
• Be sure to dry the product and the charging connector thoroughly before plugging in the charger.
• The bars on the display show you the charge level of your vehicle.
• The more the battery is used, the longer it can take to charge.
• Battery life varies depending on the temperature.
2. Charging the battery
Green LED = recharged
On the display, a full gauge
= the scooter is 100%
charged.
km/h
DIS
Red LED = charging

Other manuals for Beeper Cross

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Beeper Cross and is the answer not in the manual?

Beeper Cross Specifications

General IconGeneral
BrandBeeper
ModelCross
CategoryScooter
LanguageEnglish

Related product manuals