Behringer B-CONTROL Programming Guide

BEHRINGER B-CONTROL Programming Guide
3
Introduction
This programming guide will familiarize you with the programming of your B-CONTROL BCR2000 or
BCF2000. You will first learn how to select operating modes on your B-CONTROL and work with
presets, then you’ll learn how to work with the EDIT and LEARN programming modes, and will also
learn more about programming MMC commands. After reading this guide, you will be able to use
your B-CONTROL for controlling all kinds of MIDI-enabled software and hardware.
All settings of this programming guide that do not refer to programming MMC data (MIDI Machine
Control) will be demonstrated by using the PRO-53, a virtual synth from NATIVE INSTRUMENTS
®
.
An overlay for NATIVE INSTRUMENTS
®
PRO-53 is already included in the delivery. The assignment
of the control elements on this overlay doesn’t correspond to the programming guide because the
guide is intended to serve merely as a programming example.

Behringer B-CONTROL Specifications

General

Brand	Behringer
Model	B-CONTROL
Category	Recording Equipment
Language	English