Behringer T-1 User Manual

8 TUBE CONDENSER MICROPHONE T-1 User Manual
Specications6.
Transducer type condenser, 16 mm (0.63'')
Polar pattern cardioid
Preamplier vacuum tube (12AX7)
Output (PSU-T) gold-plated balanced XLR connector
Open circuit sensitivity -40 dBV (0 dBV = 1 V/Pa)
Frequency response 20 Hz to 20 kHz
Level attenuation -20 dB, switchable
Low-cut lter 12 dB/oct. @ 100 Hz (switchable)
Max. SPL (3% THD @ 1 kHz) 130 dB
Dynamic range 110 dB
Nominal impedance approx. 200 Ω
Load impedance >1 kΩ
Supply voltage adapter BEHRINGER PSU-T
Mains Voltage/Fuse
100-120 V~, 50/60 Hz T 160 mA L 250 V
220-230 V~, 50/60 Hz T 80 mA L 250 V
Mains connector standard IEC receptacle
Physical/Weight
Dimensions Ø shaft: 2.7", length: 8.3"
Ø shaft: 68 mm, length: 211 mm
Weight (net) approx. 1.7 lbs / approx. 0.77 kg

Behringer T-1 Specifications

Physical Dimensions

transducer type	16 mm (0.63")
dimensions	shaft: 68 mm, length: 211 mm
weight	0.77 kg

Audio Specifications

frequency response	20 Hz to 20 kHz
open circuit sensitivity	-40 dBV (0 dBV = 1 V/Pa)
max SPL	130 dB

Electrical Specifications

nominal impedance	approx. 200 Ω
supply voltage adapter	BEHRINGER PSU-T
mains voltage	100-120 V~, 50/60 Hz T 250 mA H 250 V / 220-230 V~, 50/60 Hz T 125 mA H 250 V