IMPORTANT SAFETY INSTRUCTIONS
When setting up
► Check the mains voltage available at the installation site and
only start up the machine if it corresponds to the voltage range
specified on the nameplate.
► Lay the connection cable so that nobody can trip over it and it
does not come into contact with sharp or very hot objects.
► Only connect the machine to an earthed socket. If you are
unsure, contact an electrician.
► Do not set up the device near strong heat or fire sources to
avoid damage.
► Set up the machine on a level and stable surface. Avoid unsafe
documents that can tip over or be knocked over while walking
by.
► Set up the machine out of the reach of children and people
with limited abilities.
During commissioning
► Do not operate the machine if the device or the power
cord are damaged. In this case, contact your specialist
dealer or contact Bellezza.
Operational
► During operation, some machine parts such as the brew group
or the steam pipe and the steam nozzle are very hot. Do not
touch these parts during operation to avoid burns.
► Switch the machine off immediately and pull the power plug
out of the socket if the power cord is damaged. Be careful not
to touch the damaged area. Contact your specialist dealer and
have the defective cable replaced. Do not put the machine
back into operation until the damage has been properly
repaired.
► Children from the age of 8 and people with limited physical,
sensory or mental abilities may only operate the machine after
receiving appropriate instruction. If necessary, supervise the
persons while operating the machine.
For cleaning and maintenance
► Before cleaning and maintenance work:
– Let the machine cool down.
– Disconnect the machine from the mains voltage.
► Only use a damp cloth to clean the machine. Do not immerse
the machine in water or other liquids.
6 / 32
Bellezza | Espresso machines
Important safety instructions
To Next Page
Loading...
Need help?
General
