EasyManuals Logo
Home>Benelli>Motorcycle>TRK 502X

Benelli TRK 502X User Manual

Benelli TRK 502X
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
Twist the throttle grip in the direction away from yourself to close the throttle. Use front and rear brake evenly.
Shift to low speed gear to slow down.
Before stopping the motorcycle, hold the clutch and shift to neutral position. Check the neutral position indicator
light to check whether it is in neutral position.
The motorcycle should be parked on rm and at road. If you have to park the motorcycle on a slope by the side
stand, please shift to the rst gear to prevent slipping. Shift to neutral position before starting the engine.
Turn the power key to the position " " to stop the engine.
Remove ignition key from the switch after locking for security reason.
TRK 502/ 502X
34
Warning:
It is dangerous only to use either the front brake or rear brake which may causes the motorcycle to skid or
lose control. Be careful and use brakes properly when you drive on wet road or curved road.
Notice:
Inexperienced drivers usually use rear brake only, which will accelerate abrasion of the brake and result
in longer stopping distance.
INSPECTION BEFORE DRIVING

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Benelli TRK 502X and is the answer not in the manual?

Benelli TRK 502X Specifications

General IconGeneral
BrandBenelli
ModelTRK 502X
CategoryMotorcycle
LanguageEnglish

Related product manuals