Bennett Read EV-505-S16 User Manual

9
MAINTENANCE AND CARE
CLEANING THE POST-
MOTOR FILTER
The post-motor filter assists in the
filtration process to return cleaner
air into the room
1. Unplug the vacuum from the
electrical outlet.
2. Remove the filter door (located at
the back of the vacuum) by
pushing down on the tab and
pulling out and away from the
vacuum.
3. Remove the post-motor filter from
the vacuum by grasping the two
tabs and pulling gently outwards.
4. Separate the post-motor filter
from the post-motor filter frame.
5. The post-motor filter can be hand
washed in cold water with a mild
detergent. Rinse well and air dry
thoroughly before placing back
into the vacuum.
6. Replace the filter door by placing
the two tabs on the bottom of the
filter door into the notches on the
bottom of the post-motor filter
compartment and pushing the tab
forward into the vacuum to lock
into place.
For maximum cleaning performance check the
filters often and clean or replace them regularly.
TIP:
Never operate your FORCE 8 vacuum with
damp or wet filters, or without all filters in place.
!
WARNING:
This product is intended for household use only
and not for commercial or industrial use.
Vacuuming of dust from products like plaster,
concrete or ashes will damage the motor and
void the guarantee.
NOTICE:
2.
3.
4.

Bennett Read EV-505-S16 Specifications

General

Brand	Bennett Read
Model	EV-505-S16
Category	Vacuum Cleaner
Language	English