MAINTENANCE OF WASHABLE FILTERS
1. Remove the dirt container by pressing
the dirt container release button (9) and
lifting up on the handle
2. Open the lid of the dirt container by
lifting the dirt container filter catch
3. Lift the Dirt Container Filter (21) out from
above the Multi-Cyclonic Dirt Separator
(13). Once the filter has been removed,
gently wash it in luke-warm water. A mild
detergent may be used. Ensure that the
filter is well rinsed and COMPLETELY DRY
before placing it back into the machine
Never operate your MULTI-FORCE vacuum
without all the filters in place. Doing so may
damage the motor and void the guarantee.
!
CAUTION:
7
Never operate your MULTI-FORCE
vacuum with damp or wet filters.
!
WARNING:
For maximum cleaning performance, check the
filters often and clean or replace if necessary.
TIP:
Do not use any appliances such as electric
hair dryers, to dry the filters. Filters may only
be AIR DRIED.
!
WARNING:
2.
3.
1.
To Next Page
Loading...
Need help?
General
