15
YOU ARE NOW READY TO SUCK UP THAT WET SPILL!
1
4
2
5
3
6
Undo securing clips on the sides of the unit (Refer to page 3)
Remove the microparticle filter as described earlier in the guide (Refer tp page 10)
Lift the motor unit from the dirt collection tank
Replace the microparticle filter with the sponge filter (17)
Remove high-efficiency dirt filter bag
Fasten the foam filter by tightening the filter securing lock
OPERATING INSTRUCTIONS CONTINUED
CARPET DEEP CLEANING
BEFORE DEEP CLEANING YOUR CARPETS THERE ARE A FEW PREPARATIONS THAT NEED TO BE TAKEN CARE OF.
SETTING UP YOUR BENNETT READ ONE FOR DEEP CLEANING:
Your BENNETT READ ONE is an exceptional carpet deep cleaner. Deep cleaning of your carpets is an essential
part of your home cleaning habits. Vacuuming your carpets is not enough to keep them clean and free from nasty
household allergens. We recommend that (at least once a month) you deep clean your carpets, to keep them free
from harmful allergens, in addition to removing stubborn stains. By following these recommendations you will create
a healthy home, while keeping your carpets,looking great and also extending their life.
1. Ensure that the carpet you are about to deep clean is thoroughly vacuumed with your BENNETT READ ONE in dry vacuum mode
2. Remove any furniture that may obstruct you during deep cleaning
3. It is advised that deep cleaning takes place as early in the day as possible, to allow ample time for your carpets to dry. Your BENNETT READ ONE will
remove up to 80% of the water used in the deep cleaning process. The remainder of the moisture will dry naturally according to the prevailing weather
conditions. Do not walk on the carpets until they are completely dry. Do not walk on the carpet for at least 4 hours after cleaning
4. When deciding on where to start cleaning a room, always select the corner furthest away from the door to begin and slowly work your way to the
doorway so that you can exit the room without walking on the wet carpet
3
5 6
To Next Page
Loading...
Need help?
General
