EasyManuals Logo
Home>Bennett Read>Vacuum Cleaner>ONE 114 R

Bennett Read ONE 114 R User Manual

Bennett Read ONE 114 R
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
21
BENNETT READ ONE CLEANING AND MAINTENANCE
Your BENNETT READ ONE will give you years of outstanding service. You have a part to play in extending the life
of your machine. To ensure that your BENNETT READ ONE continues to provide you with excellent service and your
family with a healthier home to live in, follow these simple cleaning and maintenance instructions:
AFTER DRY VACUUMING:
Remove all attachments and flexi-hose (28)
from the machine
Remove and clean the dust bag(13) and inner filter
(14) as explained earlier in this guide
DO NOT wash the inner filter (14) with water, only
tap it against a solid surface or blow dust away with
compressed air
Wipe dirt collection tank (6) with a damp cloth to remove
any dirt or dust. The tank may also be rinsed with warm
tap water. Allow to dry completely before storing
GENERAL:
Check the post-motor filter (10) regularly for visible dirt or dust. Rinse the high-density foam under running water until clean. Allow to
air-dry completely before placing it back into the machine. Do not store the machine with water and cleaning solution still left in the clean
water tank (8). If you have any solution left in the clean water tank after deep cleaning it is recommended to store this solution in an air
tight container for future use
AFTER WET VACUUMING OR DEEP CLEANING :
Remove all attachments and flexi hose (28) from the machine
Empty dirty water from the dirt collection tank (6), wipe with
a cloth to remove any stubborn dirt, rinse thoroughly with
warm water and allow to dry completely before storage
Remove foam filter (17), rinse and allow to dry completely
Rinse and clean all parts and accessories (except filters
that cannot be wet) thoroughly and allow to dry completely
before storage
To clean the flexi hose, flush clean by running hot tap
water through it and allow to dry completely before using
again or storage
Always unplug the machine from the mains power before you start with cleaning and maintenance.
You can also clean the flexi-hose by vacuuming up some clean water from a bucket while set-up for wet vacuuming
NOTE:
CLEANING TIP:

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bennett Read ONE 114 R and is the answer not in the manual?

Bennett Read ONE 114 R Specifications

General IconGeneral
BrandBennett Read
ModelONE 114 R
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals