BIGTREETECH SKR-PRO-V1.2 User Manual

SKR Pro V1.2 User Manual Shenzhen Biqu Technology Co., Ltd.
5 / 18
7)Motor drive interface: X, Y, Z, E0, E1, E2,total 6 channels.
8) Temperature sensor interface: T0, T1, T2, T3 total 4 channels
100K NTC .(thermal resistance)
9) Display screen: BIGTREETECH- 2.8 inch TFT,BIGTREETECH-3.5
inch TFT, LCD2004,LCD12864
10) PC communication interface: square USB, convenient to
plug and unplug, communication baud rate is 11520
11) Support Expansion Port: Automatic Shutdown Module
After Printing , Power Off Resume Print Module , Filament
break detection and Automatic leveling,
BL Touch, WIFI, PWM, ADC, UART, I2C and SPI,etc.
12)Support file format: g-code
13) Support machine structure: XYZ, delta, kossel, Ultimaker,
corexy
14)Recommended software: Cura, Simplify3D, pronterface,
Repetier-host, Makerware
15) multiple power supply, sharing the pressure of single
power line under current.
Ⅳ、Content of the upgrade
1） Change the hot bed interface screen printing;

BIGTREETECH SKR-PRO-V1.2 Specifications

General

Brand	BIGTREETECH
Model	SKR-PRO-V1.2
Category	Motherboard
Language	English