Bilt TEETER DEX II User Manual

Unpack and Prepare Your Workspace
• If possible, assemble the equipment at or near the space in which you intend to use it to avoid moving it later.
• Allow a workout area minimum of 18” in front and 16” in back of the machine.
• Keep an additional free area of 24” clear along the side used to access the machine and to the rear of the machine.
• Unpack all parts and support materials. Set aside packing materials and clear your work area.
• Locate the Hardware Kits packaged with the assembly instructions, labeled to correspond with the assembly process.
LET’S GET STARTED
FIGURE 4
ASSEMBLE BASE & LEG FEET
STEP 1
5
Figure 1b
Figure 1a
Figure 1a: Slide the Base Feet onto the end of the Base
Frame.
Figure 1b: Slide the Leg Feet onto the end of the Legs.
Push firmly on all four feet to ensure they are fully
mounted.
Workout Area
16 in.
Workout Area
18 in.
Clearance Area
24 in.
Clearance Area
24 in.
W
or
k
out Are
a
1
6
in
.
W
or
k
out Are
a
1
8
i
n
.

Bilt TEETER DEX II Specifications

General

Brand	Bilt
Model	TEETER DEX II
Category	Fitness Equipment
Language	English