1. Vacuum carpet (see page 9, HOW TO DRY VACUUM).
2. Decide where to begin — and end — your job. Clean in
3’ X 4’ sections, starting in areas farthest from exit. Plan to
leave a path open to empty collection tank and replenish
filling cavity.
3. Carpeting will dry in two to four hours, depending on carpet
style and air circulation in room. A floor fan speeds drying.
4. Plan activities to give carpet time to dry.
5. Replace furniture on damp carpeting by placing waxed
paper under legs until floor dries completely.
How to begin...
Deep cleaning carpet
1. Check manufacturer’s tag before cleaning. “W” or “WS” on
the tag means you can use your Big Green. If tag is coded
with an “S” (with diagonal strike-through), or says “Dry
Clean Only,” do not proceed.
2. If manufacturer’s tag is missing or not coded, check with
your furniture dealer.
3. If possible, check upholstery stuffing. Colored stuffing may
bleed through fabric when wet.
1. The Big Green is not recommended for cleaning wood floors.
2. Use only Bissell
®
Floor Care cleaning solution on no-wax
floors. Never use Bissell
®
Carpet Cleaner or other carpet
cleaners on bare floors.
3. Sweep before starting.
4. Remove old wax before cleaning.
5. Leave an exit path.
6. Allow at least 1/2 hour drying time.
Deep cleaning upholstery
Cleaning bare floors
Tip:
Deep cleaning
carpeting and
upholstery
regularly can
reduce dust and
allergens in
your home.
Always vacuum before you clean.
If possible, move larger furniture
aside. But if it’s not possible to
move your furniture, don’t worry
- your Big Green features a
cleaning wand that easily
maneuvers under and around
furniture.
To Next Page
Loading...
Need help?
General
