8
www.bissell.com
Operation
Fill the water tank
1. Release the handle and lay the machine
handle back to access the tank.
2. Remove the tank from the base of the
machine by lifting the tank carry handle.
3. Carry like a bucket to the sink. Rotate the handle
forward to unlatch the lid. Lift off and set the
lid aside.
4. Using the measuring cup, pour BISSELL deep
cleaning formula into the mouth of the bladder.
5. Fill up the bladder with clean hand
hot tap water.
*Do not boil or microwave water as it can
destroy the bladder.
6. Replace the top of the tank by matching the lid
and tank edges. Handle must be in the forward
position in order to replace lid. Rotate the handle
to the carrying position to latch the lid.
Note: Remember to secure the lid and test to make
sure it is secure before picking up the tank.
7. Place tank into machine base, seating firmly
in place. Rotate tank handle back into latched
position. Bring machine handle back into
upright position.
Set ReadyTools dial
Set ReadyTools dial to floor cleaning.
Power switch
1. Plug into a proper outlet and turn the power
switch to the ON ( I ) position. The switch is
found on the back of the handle.
1 2
3 5
6 7
WARNING:
To reduce the risk of fire and
electric shock due to internal
component damage, use only
BISSELL cleaning formulas
intended for use with the
deep cleaner.
To Next Page
Loading...
Need help?
General
