EasyManuals Logo
Home>Blakeslee>Dishwasher>UC-21

Blakeslee UC-21 User Manual

Blakeslee UC-21
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
SECTION I INSTALLATION
The Model UC21 is suitable for both under the counter and free standing installations. Access is
required to both the sides and rear of the machine for service and maintenance. Therefore, all
connections should be made with flexible hoses and conduit to ensure that access can be achieved.
SHIPMENT CHECKOUT & UNCRATING
Unit is shipped with standard commercial packing, should any damage be observed on visual
inspection of the crate; notify the freight carrier immediately, as hidden damage may exist.
No special equipment is required to uncrate the unit. However care should be taken to ensure that no
damage is caused by the implements used in uncrating the machinery.
Level the machine by adjusting legs as necessary, while maintaining counter clearance dimensions.
NOTE: If machine is not leveled properly door will not close correctly
If door rubs on right
side adjust right leg
down or left leg up
If door rubs on left
side adjust left leg
down or right leg up
FIGURE 1
INSTALLER WARNING
To protect Booster Heating Element
Do not turn on electrical power supply to dishwasher until water supply has first been connected and
you are ready to proceed with actual test operation of the machine.
-1-

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Blakeslee UC-21 and is the answer not in the manual?

Blakeslee UC-21 Specifications

General IconGeneral
BrandBlakeslee
ModelUC-21
CategoryDishwasher
LanguageEnglish

Related product manuals